Joining lime plaster with plasterboard at corner

[trimattrdg]

I will replacing dot and dab on a solid wall with lime plaster. The solid wall is joined to a stud wall which is plasterboard and I intend to leave. Any suggestion on how I can join the lime and plasterboard on the outside corner without it looking terrible. Currently there is a metal beading on the corner within the plasterboard. Thanks

 

[aockenden]

I will replacing dot and dab on a solid wall with lime plaster. The solid wall is joined to a stud wall which is plasterboard and I intend to leave. Any suggestion on how I can join the lime and plasterboard on the outside corner without it looking terrible. Currently there is a metal beading on the corner within the plasterboard. Thanks

Not sure but I need to know as well for our house so I’ll post here to get notifications about answers.

 

[trimattrdg]

Not sure but I need to know as well for our house so I’ll post here to get notifications about answers.

 

[trimattrdg]

This is where we have done it on the inside corner and looks good enough for me but outside corner looks more challenging

 

[paulc]

I used plasterboard on my kitchen ceiling. Where it joined the lime plaster on the walls, I stuck some fibreglass scrim tape over the join. The plasterboard then had a coat of Febond Blue Grit followed by a skim of lime plaster (as did the walls). Seems to be standing up quite well, and no cracks to report.
I also used plastic corner beads where needed - These won't ever rust like the galvanised steel ones do.